How To Set Up Uhf Wireless Microphone

PROFESSIONAL
Wireless Microphone System
User Manual

CAUTIONS AND Warning

CAUTION
A Take chances OF ELECTRIC Shock Do Non Open up

CAUTION: To reduce the adventure of electric daze, practise not remove cover (or back). No user-serviceable parts inside. Only refer servicing to qualified service personnel.

The lightning flash & arrowhead symbol within an equilateral triangle is intended to alarm you to the presence of danger.
The exclamation point within an equilateral bangle Is Intended to alert you to the presence of important operating and servicing instructions.

Alarm
To reduce the risk of fire or electric shock, do non expose this unit to pelting or moisture.

1. Read Instructions – All the safety and operating instructions should be read before the apparatus is operated.
2. Retain Instructions – The prophylactic and operating instructions should be retained for hereafter reference.
3. Heed Warnings – All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow Instructions – All operating and use instructions should exist followed.
5. Attachments – Do not use attachments non recommended by the product manufacturer as they may cause hazards.
6. H2o and Moisture – Do not apply this unit near h2o. For example, near a bathtub or in a wet basement and the similar.
7. Carts and Stands – The appliance should be used simply with a cart or stand that is recommended by the manufacturer.
   seven. A. An appliance and cart combination should exist moved with care. Quick stops, excessive force, and uneven surfaces may cause an overturn.
8. Ventilation – The appliance should be situated then its location does not interfere with its proper ventilation. For case, the appliance should non be situated on a bed, sofa, rug, or similar surface that may block the ventilation slots.
9. Heat – The appliance should be situated away from estrus sources such as radiator, heat registers, stoves, or other appliances(including amplifiers) that produce rut.
10. Ability Sources – Precautions should exist taken so that the grounding or potentiation marked on the appliance.
11. Grounding or Polarization – Precautions should be Taken so that the grounding or polarization means of the appliance is not defeated.
12. Power Cord Protection – Power-suggly cords should be route so that they are not likely to exist walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs, convenience receptacles, and the betoken where they exit from the appliance.
13. Cleaning – Unplug this unit of measurement from the wall outlet earlier cleaning. Do non use liquid cleaners or aerosol cleaners. Utilise a clammy or dry cloth for cleaning.
14. Power Lines -An outdoor antenna should exist located away from power lines.
15. Nonuse Periods – The power cord of the appliance should exist unplugged from the outlet when left unused for a long period of time.
16. Object and Liquid Entry –Care should be taken so that objects do not fall and liquids are not spilled into enclosure through openings.
17. Damage Requiring Service – The appliance should exist serviced by qualified service personnel when:
    A. The power supply cord or plug has been damaged; or
    B. Objects have fallen into the appliance; or
    C. The apparatus has been exposed to rain; or
    D. The appliance does not appear to operate normally or exhibits a marked change in functioning; or
    E. The appliance has been dropped, or the enclosure damaged.
18. Servicing – The user should not attempt to service the appliance across that described in the operating instructions. All other servicing should be referred to qualified service personnel.

INTRODUCTION

Thank you for purchasing this professional person wireless microphone system. Savour the meaty and like shooting fish in a barrel-going features it brings to you, and to a higher place all, savour the excellent sound quality that only experienced professional manufacturers can produce today. This wireless microphone organization contains the following components:

• Wireless Receiver
• Handheld Microphone Transmitters
• Batteries for Transmitters
• Audio Connecting Cable
• User Transmission
• (Adapter)

Description

Wireless Receiver (Figure 1)

1. Ability Push.	7. Mixed unbalanced audio output connector(six.35mm connector).
2. Ability LED light.	viii. XLR Audio Output Connectors.
3. Volume.	9. Separated audio output connector.
4. RF Point Indicator.	10. Power cord AC 220V.
five. Display Screen.	11. Power Input Connector: Connect to a 220V/110V DC Power adapter.
half dozen. Telescoping Antennas: to receive signals from the transmitter.	12. Frequency.

Handheld Microphone Transmitter (Effigy two)

1. Ability Button: press and hold on to turn on or turn off the power;
2. Display Screen: display the channel and frequency;
3. Low Battery Indicator: the red low-cal turn on if the battery is not enough ;
4. Bombardment Embrace;
5. Sound Receiver: steel netting and sound head module;

Trunk-Pack Transmitter (Effigy 3)

1. Battery Compartment. Effigy 3
2. Microphone Input Connector. Connector provides connexion to a diverseness of lavaliere and headset micrphone cables and as well every bit a transmission antenna.
3. Display Screen: display the channel and frequency;
4. Power and Low Bombardment Indicator. When this ruby light is glowing, you have 20 mintues or less of useful operating fourth dimension to change the bombardment.
5. Power and Mic MUTE ON/OFF Switch.
6. Transmitting Antenna: transmitting signals to receiver;
7. Lavalier Microphone: this can exist replaced with a headset microphone or other musical instrument connecting cables.

Using The Wireless Receiver

1. Connect the Ac adapter to the Power jack on the rear panel of the receiver . Plug the AC adapter into an appropriate power outlet.
2. Printing the power switch to the ON position to turn on the receiver and the power indicator light turn red. Brand the antennas and the receiver body for a 90° angle.
3. Audio output connectedness: For the mixed output, please connect A+B mixed output of the receiver and the audio connecting cable; For the separate output, please connect A output or B output of the receiver and the audio connecting cable.
4. When the handheld microphone on, the receiver" RF " signal is growing. The receiver output volume can exist adapted past the book control knob;
5. If information technology is not used for a long time, delight pull out the ability adapter.

Using The Handheld Microphone Transmitters(Figure iii)

1. Take off the transmitter battery cover to expose the bombardment case. Insert two 1.5V batteries into the battery visitor compartment and so replace the battery cover.
2. Press the power push button and hold on to plow on the ability. The brandish screen will calorie-free up the microphone volition first to piece of work. If the LED light do not light, please check whether the polarity of the battery is correct.
3. Replaced the batteries if the power light plough crimson for the battery voltage not enough.
4. If it is non used for a long time, please have out the batteries in the microphone, so as to avert battery leakaging and damaging the microphone.

USING THE Trunk-PACK TRANSMITTERS

NOTE: The body-pack system is designed for employ with other equipment, such as lavaliere microphones, instrument cables, headset microphones, etc.See your dealer for details on ordering the proper equipment for your needs.

1. Prune the body pack transmitter to your belt or guitar strap.
2. Connect the lavaliere microphone, headset or instrument adapter cablevision to the trunk-pack transmitter.
3. Turn the transmitter POWER switch on. Check Power/Battery fuel gauge.
4. Check the RF Signal Indicator on the receiver to see if the RF signal Is being received.
5. Begin speaking or playing your instrument.
6. During the functioning or presentation, slide the ON/MUTE/OFF switch to the MUTE position when the system is non being used.
7. When the functioning or presentation is over, slide the transmitter ON/MUTE/OFF switch to the OFF position to conserve battery power.

TIPS AND TROUBLESHOOTING

Tips for getting the all-time functioning

• Maintain a line of sight between the transmitter and receiver antennas.
• Go along the receiver and antennas away from large metal objects.
• Avert placing the receiver almost computers or other RF generating equipment.
• Indicate the receiver antennas straight upward.
• Avoid placing the receiver in the bottom of an equipment rack unless the antennas are remotely located.

Troubleshooting

Some common problems and their solutions are identified in the table beneath. If yous are unable to solve a trouble, contact your dealer.

Trouble	Solution
No sound; RF low-cal(Southward) not glowing.	• Make certain the transmitter Ability switch is ON and the receiver is plugged into a power source. • Bank check battery. • Bank check receiver squelch setting. • Check receiver antenna connection(s). • Make sure antennas are in line of sight of transmitter.
No sound; RF lights glowing.	• Turn up receiver audio VOLUME control. • Check for proper connexion between receiver and sound mixer unit of measurement.
Received bespeak is noisy or contains extraneous sounds with the transmitter on.	• Check battery. • Remove local sources of RF interference. • If using a guitar or other musical instrument, bank check connections. Two transmitters may be operating on the same frequency. Locate and breadbasket ane-off. • Signal may be too weak. Reposition antennas. If possible, move them closer to transmitter.
Dissonance from receiver with transmitter off.	• Adjust receiver squelch control. • Remove local sources or RF interference. • Reposition receiver or antennas.
Momentary loss of sound every bit transmitter is moved effectually performing area.	• Reposition receiver and perform some other "walk through" lest and observe the RF indicators. If audio dropouts persist, marker these expressionless spots in the performing area and avoid them during the performance.

SPECIFICATIONS

Squelch Control: Dissonance Lock Frequency Difference: ±18kHz Frequency Response: 80Hz-15kHz Frequency Stability: + 0.005% Due south/N_Ratio: >70db Full Harmonic Distortion: <0.5%(at 1kHz) Number of Channels: 2 Channels(or 4Channel) Receiving Sensitivity: >-90dB

Operating Range: 50m in open Area; Resonance Interfere Rate: ≥ 50dB; False Image Interfere Rate: .≥ 50dB; Receiver Power Supply: DC 110-120V/220-240V; Transmitter Ability supply: 1.5V Batteries; Transmit Power: ≤ 10mW; Frequency Range: 500MHz-540MHz Output Type: Separated or Mixed Output

Specifications are subject to change without further notice.

Pismire.	Atnenna Brand	Antenna Model Proper noun	Antenna Type	Connector	Gain (dBi)	EIRP(dBm)	Annotation
1	N/A	GaZ	PIER Antenna	Northward/A	1.0	vi	Antenna

This device complies with Part 15 of the FCC Rules. Functioning is field of study to the following two atmospheric condition: (1) this device may not cause harmful interference, and (ii) this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and establish to comply with the limits for a Class B digital device, pursuant to Part fifteen of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and tin can radiate radio frequency energy and, if non installed and used in accordance with the instructions, may cause harmful interference to radio communications. Withal, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be adamant by turning the equipment off and on, the user is encouraged to try to correct the interference by 1 or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a excursion different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/Goggle box technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user'due south authority to operate the equipment

Documents / Resources

UHF Pro Wireless Microphone System [pdf] User Manual AU400, 2A2NH-AU400, 2A2NHAU400, Professional Wireless Microphone Arrangement, Pro Wireless Microphone System, Wireless Microphone System

Source: https://manuals.plus/uhf/pro-wireless-microphone-system-manual

Share this post